**Given: **

The lamp draws the current is

[tex]I=0.50\text{ A}[/tex]The voltage supplied by the generator is

[tex]V=120\text{ V}[/tex]The time for which energy converted is

[tex]\begin{gathered} t=5\text{ min} \\ t=5\times60\text{ s} \\ t=300\text{ s} \end{gathered}[/tex]**Explanation:**

**(a) **

The power delivered by the generator is given by

[tex]P=VI[/tex]Plugging all the values in the above equation, we get

[tex]\begin{gathered} P=120\text{ V}\times0.50\text{ A} \\ P=60\text{ watt} \end{gathered}[/tex]**The power delivered by the generator is **

(b)

Energy is converted by the electric lamp is given by

[tex]E=Pt[/tex]Plugging all the values in the above relation, we get

[tex]\begin{gathered} E=60\text{ watt}\times300\text{ s} \\ E=18000\text{ J} \end{gathered}[/tex]Thus, **the electric energy convert by the lamp is **

A fisherman in a stream 30 cm deep looks downward into the water and sees a rock on the stream bed. How deep does the stream appear to the fisherman? Let the index of refraction of the water equal 1.33O 26cmO 40cmO 34cmO 23cm

**Given:**

The depth of the stream, d=30 cm

The refractive index of water, n=1.33

**To find:**

The apparent depth of the stream.

**Explanation:**

Let the eye of the fisherman is at a large height from the surface of the water.

Thus,

[tex]\sin(i)=\frac{x}{d}[/tex]Where i is the angle of incidence and r is the opposite side of the angle of incidence.

And,

[tex]\sin(r)=\frac{x}{h}[/tex]Where r is the angle of refraction and h is the apparent depth of the stream.

The refractive index of the air is n_a=1.

From snell's law,

[tex]n_a\sin r=n\sin i[/tex]On substituting the known values,

[tex]\begin{gathered} 1\times\frac{x}{h}=1.33\times\frac{x}{d} \\ \implies h=\frac{d}{1.33} \\ =\frac{30}{1.33} \\ =23\text{ cn} \end{gathered}[/tex]**Final answer:**

**The correct answer is option d.**

Calculate the area of the plates of a 1 pF parallel plate capacitor in a vacuum if the separation of the plates is 0.1 mm. [ε0=8.85×10-12C2N-1m-2 ]

**Answer:**

For parallel plate capacitor ,the capacitance C=dAϵ0

Area, A=ϵ0Cd=8.85×10−121×10−3=1.13×108m2

Pls Check This Answer Is correct or not

actually i am not sure

How long must a 400 W electrical engine work in order to produce 300 kJ of work?

In order to calculate the time needed, let's use the formula below:

[tex]P=\frac{E}{t}[/tex]Where P is the power in Watts, E is the energy/work in Joules and t is the time in seconds.

First, let's convert the energy from kJ to J (1 kJ = 1000 J):

[tex]300\text{ kJ}=300000\text{ J}[/tex]So, for P = 400, we have:

[tex]\begin{gathered} 400=\frac{300000}{t} \\ t=\frac{300000}{400} \\ t=750\text{ s} \end{gathered}[/tex]Therefore **the time needed is 750 seconds.**

what is the formula to use when measuring specific heat capacity by method of mixtures?

Answer: **Cs = [m1c1(T - T1) + mcCc(T - Ts)]/Ms(Ts - T)**

Explanation:

The concept of heat exchange which is expressed as

heat lost by a hot body = heat gained by a cold body

The specific heat of a solid substance as determined by the method of mixture using the heat exchange concept would be

Heat lost by substance = heat gained by liquid + heat gained by calorimeter

Thus,

MsCs(Ts - T) = m1c1(T - T1) + mcCc(T - Tc)

Dividing both sides by Ms(Ts - T)

The formula for calculating the specific heat capacity by method of mixtures is

**Cs = [m1c1(T - T1) + mcCc(T - Ts)]/Ms(Ts - T)**

Where

m1 = mass of liquid

c1 = specific heat of liquid

ms = mass of substance

Cs =specific heat of substance

mc = mass of calorimeter

Cc = specific heat of material used in making the calorimeter

T = Final temperature of the mixture

T1 = initial temperature of the liquid

Ts = initial temperature of the substance

Question is in attachment!

Thanks!

Concept : Thermodynamics

A cylinder with a movable piston contains 3 moles of hydrogen at standard temperature and pressure. The walls of the cylinder are made of a heat insulator, and the piston is insulated by having a pile of sand on it. By what factor does the pressure of the gas increase if the gas is compressed to half its original volume?

Solution :

The cylinder is completely insulated from its surroundings. As a result, no heat is exchanged between the system (cylinder) and its surroundings. Thus, the process is adiabatic.

Initial pressure inside the cylinder =P1

Final pressure inside the cylinder =P2

Initial volume inside the cylinder =V1

Final volume inside the cylinder =V2

Ratio of specific heats, γ=CVCP=1.4

For an adiabatic process, we have:

P1V1γ=P2V2γ

The final volume is compressed to half of its initial volume.

∴V2=V1/2

P1V1γ=P2(V1/2)γ

P2/P1=V1γ/(V1/2)γ

=21.4=2.639

Hence, the pressure increases by a factor of 2.639.

**Answer:**

The cylinder is fully isolated from the rest of the environment.

There is no heat exchange between the system (cylinder) and its surroundings as a result of the design. As a result, the process is called adiabatic.

P1 represents the initial pressure inside the cylinder.

P2 is the final pressure within the cylinder.

V1 is the volume of the cylinder at its beginning.

The final volume of the cylinder is equal to V2.

The specific heat ratio, = Cp / Cv = 1.4,

We have the following for an adiabatic process:

P1V1γ = P2V2γ

After compression, the final volume is reduced to half of its original size.

Hence,

V2 = V1 / 2

P1V1γ = P2(V1 / 2)γ

P2 / P1 = V1γ / (V1 / 2)γ

= 21.4

We get,

= 2.639

Therefore, the pressure increases by a factor of 2.639

**Explanation:**

hope it helps you

...as shall be thought most meet and convenient for the general good of the colony, unto which we promise all due submission and obedience.

This quote from the Mayflower Compact may have influenced the colonists to believe that (1 point)

a

they needed to expand to created additional colonies

b

all citizens would have to abide by the new laws created

c

they needed to create a list of laws for all citizens to follow

d

each person in the colony must be obedient to the laws of the king

**Mayflower Compact** influenced the colonists to believe that all citizens would have to abide by the **new laws **created

The colonists who sailed for the New World created a set of self-government laws known as the **Mayflower Compact**. The Pilgrims and other immigrants hoped to settle in northern Virginia as soon as they arrived in America. The immigrants' ship was forced off track by perilous shoals and storms and instead came ashore in Massachusetts, close to Cape Cod, outside of Virginia's authority.

The colonial authorities knew that life without laws may be devastating, so they created the **Mayflower Compact **to assure that a workable social structure would prevail. It preserved the idea of a law enacted by the people. This is the essential tenet of democracy. The Declaration of Independence was influenced by the notion that all citizens, not just a small group of elites, should have their interests represented by the government.

Read more about **Mayflower Compact **on:

https://brainly.com/question/11818172

#SPJ1

A car is driving away from you at a constant speed for a while, and then it

gradually slows to a stop. Imagine a speed-versus-time graph showing the

car’s motion. Describe the line on the graph.

The **line **on the s**peed-time graph** will slant from up to down showing a state of coming to rest.

**What is speed - versus - time graph?**

A **speed **versus-**time-graph** is a type of graph that shows the relationship between the speed of an object and the time of motion of the object.

For upward **acceleration **of an object when the object is speeding up, the line on the **graph **for such motion increases upward in a direct relationship with time of motion.

For a downward motion in which the object in motion slows down, the line on the **graph **for such motion will slant downward showing a gradual decrease in the **speed **of the object.

Thus, for a car that is driving away from you at a **constant speed** for a while, and then it gradually slows to a stop, the **line **on the s**peed-time graph** will slant from up to down showing a state of coming to rest.

Learn more about** speed - time graph** here: https://brainly.com/question/769606

#SPJ1

In laser eye surgery, the average laser pulse power is 74 kW, and contains 1 mJ of light energy. Each laser pulse lasts

nanosecond.

If an average laser pulse power is 74 kW, and contains 1 mJ of light energy, each laser pulse lasts for a **time period **of 0.074 ns

**E = P t**

E = Light energy

P = Pulse power

t = Time

E = 74 KW = 74 * 10³ W

P = 1 * [tex]10^{-3}[/tex] J

t = E / P

t = 74 * 10³ / 1 * [tex]10^{-3}[/tex]

t = 74 * [tex]10^{6}[/tex] s

t = 0.074 ns

**Power **is the rate of work done. It can also be called as rate at which energy is used. This can be used to all forms of work and all types of energy.

Therefore, each laser pulse lasts **0.074 nanosecond**.

To know more about **Pulse power**

https://brainly.com/question/17572333

#SPJ1

Calculate the force which will produce an extension of 0.30mm in a steel wire with a length of 4.0m and a cross section area of 2.0 x 10^(-6) m^2Youngs modulus of steel is 2.1 x 10 ^11 Pa

Given data:

* The extension of the steel wire is 0.3 mm.

* The length of the wire is 4 m.

* The area of cross section of wire is,

[tex]A=2\times10^{-6}m^2[/tex]* The young modulus of the steel is,

[tex]Y=2.1\times10^{11}\text{ Pa}[/tex]Solution:

The young modulus of the steel in terms of the force and extension is,

[tex]Y=\frac{F\times l}{A\times dl}[/tex]where F is the force acting on the steel wire,, l is the original length of the wire, dl is the extension of the wire, and A is the area,

Substituting the known values,

[tex]\begin{gathered} 2.1\times10^{11}=\frac{F\times4}{2\times10^{-6}\times0.3\times10^{-3}} \\ F=0.315\times10^2\text{ N} \\ F=31.5\text{ N} \end{gathered}[/tex]**Thus, the force which produce the extension of 0.3 mm of the steel wire is 31.5 N.**

3. A uniform light beam is pivoted halfway along its length. At one end it supports a load of 5 kN while the other end is tethered to a fixed point by a rope inclined at 45° to the horizontal. If the beam is in equilibrium, what is the tension in the rope?

**Answer:**

Approximately [tex]7.1\; {\rm kN}[/tex] ([tex]5 \sqrt{2}\; {\rm kN}[/tex].)

**Explanation:**

Let [tex]F_{1}[/tex] and [tex]F_{2}[/tex] denote the two forces that act on this beam. Let [tex]s_{1}[/tex], [tex]s_{2}[/tex], [tex]\theta_{1}[/tex], and [tex]\theta_{2}[/tex] denote the distance from pivot and angle relative to the beam of the two forces, respectively. The magnitude of the torques that the two forces exert on this beam will be [tex]F_{1}\, s_{1}\, \sin(\theta_{1})[/tex] and [tex]F_{2}\, s_{2}\, \sin(\theta_{2})[/tex], respectively.

The two forces in this question act on the beam from opposite sides of the pivot. Hence, for the beam to be in equilibrium, the torque from the two forces need to be equal in magnitude. In other words:

[tex]F_{1}\, s_{1}\, \sin(\theta_{1}) = F_{2}\, s_{2}\, \sin(\theta_{2})[/tex].

Let [tex]F_{1}[/tex] denote the [tex]5\; {\rm kN}[/tex] force that the load exerts on this beam; [tex]\theta = 90^{\circ}[/tex] since this load is placed directly on the beam. The normal force from the load will be perpendicular to the beam.

Let [tex]F_{2}[/tex] denote the force that the rope exerts on this beam; [tex]\theta = 45^{\circ}[/tex].

Note that [tex]s_{1} = s_{2}[/tex] since the pivot is exactly halfway between the two forces.

Rearrange the equation [tex]F_{1}\, s_{1}\, \sin(\theta_{1}) = F_{2}\, s_{2}\, \sin(\theta_{2})[/tex] to find the unknown [tex]F_{2}[/tex]:

[tex]\begin{aligned}F_{2} &= \frac{F_{1}\, s_{1}\, \sin(\theta_{1})}{s_{2}\, \sin(\theta_{2})} \\ &= \frac{F_{1}\, \sin(\theta_{1})}{\sin(\theta_{2})} && (\text{since $s_{1} = s_{2}$}) \\ &= \frac{5\; {\rm kN}\, \sin(90^{\circ})}{\sin(45^{\circ})} \\ &= \frac{5\; {\rm kN}}{(1 / \sqrt{2})} \\ &= 5 \sqrt{2}\; {\rm kN} \\ &\approx 7.1\; {\rm kN} \end{aligned}[/tex].

The tension in the rope will be equal in magnitude to the force exerted on the beam: approximately [tex]7.1\; {\rm kN}[/tex] ([tex]5 \sqrt{2}\; {\rm kN}[/tex].)

Describe the relationship between the state of matter of a pure substance (gas, liquid, solid) and the motion of the particles.

I will brainliest you!

**Answer:**

Gas is one of the state of pure substance and it have no shape and also it is non comprsable

Liquid is state of pure substance and it occupies the shape of its body and its slightly comrisable

Solid is the other physical state and it have definite volume and shape and also it is highly comrisable

How far will a car travel going at a speed of 18 m/s in 42 minutes?

O 756 meters.

O2,520 meters.

O 45,360 meters.

O 140 meters.

**Answer:**

d = rt

**Explanation:**

distance = ?

rate = 18 m/s

time = 42 x 60 = 2520 s

distance = 18 x 2520 = 45360 m

Question 2 of 25Which of the following is an effect of increasing the wavelength of anelectromagnetic wave?O A. Energy decreases.O B. Speed decreases.O C. Speed increases.O D. Energy increases.SUBMIT

Thesppeed of electromagnetic waves remains the same an is eqal to the speed of light. The wavelength is rearlated tothe energy bty the following ormula:

[tex]\lambda=\frac{c}{f}[/tex]Wher:

[tex]\begin{gathered} \lambda=\text{ wavelength} \\ c=\text{ speed of light} \\ f=\text{ frequency} \end{gathered}[/tex]Therefore, if the wavelength increases the frequency must decrease.-

Since the energy is proportiona to the frequency if the dfrequency decreases the energy decreases. Therefore, the right answer is A.

**Answer:**

energy decreases

**Explanation:**

hope this helps!

Fernando, who has a mass of 43.0 kg, slides down

the banister at his grandparents' house. If the

banister makes an angle of 35.0° with the horizontal,

what is the normal force between Fernando and the

banister?

From the calculations, the** normal force **on the body is ** 345 N.**

Let us recall the theory of **Newton **that states that action and reaction are equal and opposite. We know that the **force **that is exerted on an object is equal to the reaction of that surface of the object on the source of the force.

We know that the** normal force **can be given by the formula;

N = mgcosθ

m = mass of the object

g = acceleration due to gravity

θ = angle involved

We would now have

N = 43.0 kg * 9.8 m/s^2 * cos 35

N =** 345 N**

Learn more about **normal force**:https://brainly.com/question/18799790

#SPJ1

If an object mass is 2 kg. And an applied force is acting on it at 15 N And the force of friction is 5 N and what is the objects acceleration

Given,

The mass of the object, m=2 kg

The applied force, F=15 N

The frictional force, f=5 N

The frictional force is a force that opposes the motion of an object. Hence it will be always be directed opposite to the direction of motion of the object.

The net force acting on the object is given by,

[tex]F_n=F-f[/tex]From Newton's second law of motion, the net force is given by,

[tex]F_n=ma[/tex]Where a is the acceleration of the object.

Therefore,

[tex]\begin{gathered} ma=F-f \\ \Rightarrow a=\frac{F-f}{m} \end{gathered}[/tex]On substituting the known values,

[tex]\begin{gathered} a=\frac{15-5}{2} \\ =5\text{ m/s}^2 \end{gathered}[/tex]**Therefore the acceleration of the object is 5 m/s²**

A 180 N force acts at 190 degrees and a 140 N force acts at 260 degrees. Determine the magnitude and direction (include angle) of the resultant. Scale is 1cm =10N

NEED HELPPP ASAPPPPPP

The magnitude of the **force **is found to be **274.19N**.

**Force **(F1)acting on θ1(190°) is 180N

**Force** (F2)acting on θ2(260°) is 140N

Therefore the angle between F1 and F2 is

θ2-θ1 = 180°-140° =40°

Now we calculate **magnitude of force**,

Magnitude of force ,F= F1+F2

F. F = [tex]\sqrt{ ( F1+F2). (F1+F2) }[/tex]

|F|² = [tex]\sqrt{F1 ²+F2 ²+F1 F2 COS θ}[/tex]

F= [tex]\sqrt{ 180²+140²+2×180×140× cos40°}[/tex]

F= [tex]\sqrt{32400+19600+23184}[/tex]

F= [tex]\sqrt{75184}[/tex]

**F= 274.19N.**

Thus, the magnitude of the **force** is found to be 274.19N.

The **magnitude** of the force is the entire quantity of forces acting on an object. When all forces are pulling in the same direction, the force becomes stronger. The strength of a force decreases as it is applied to an object from various angles.

Force has a magnitude and a direction, thus a** vector quantity**. The outcomes of two equal-sized forces acting in opposite directions one in the east and the other in the west are not the same.

To learn more about** vector quantity**, refer this link.

https://brainly.com/question/13930100

#SPJ1

Review the statements below. Select the one that best describes the difference between astronomy and cosmology.

A) Astronomy is a much broader study of the universe as a whole, while cosmology is a more focused study on specific objects or celestial bodies contained within the universe.

B) Astronomy is the study of objects in the universe—how they are formed, their composition, and how they change over time. Cosmology is the study of the entire universe—what objects are contained in the universe, and what is happening to the universe over time, including how it may or may not end.

C) Astronomy is a branch of science that focuses on the beginning, middle, and end of the universe. Cosmology is the study of how objects move, interact, and change.

D) Astronomy is the study of space in general through the use of telescopes and other tools, while cosmology is the study of specific objects in space.

The statement that correctly differentiates between **astronomy** and **cosmology** is as follows: **Astronomy** is a much broader study of the universe as a whole, while **cosmology** is a more focused study on specific objects or celestial bodies contained within the universe (option A).

**Astronomy** is the study of the physical universe beyond the Earth's atmosphere, including the process of mapping locations and properties of the matter and radiation in the universe.

On the other hand, **cosmology** is the study of the physical universe, its structure, dynamics, origin and evolution, and fate.

**Astronomy** studies objects and phenomena beyond Earth, whereas **cosmology** is a branch of astronomy that studies the origin of the universe and how it has evolved.

Therefore, it can be said that **astronomy** studies the universe from a much broader sense while **cosmology** is much more specific study.

Learn more about **astronomy** at: https://brainly.com/question/1826143

#SPJ1

Create a Graph : Include numbers, axes, and order pairs

Answer:

a) Peak value = 20

b) Average value = 9.0

c) RMS value = 14.15

Explanation:**The peak-to-peak value = 40**

**c) The rms value**

**b) Average value over alternation of the sine wave **

An average froghopper insect has a mass of 12.7 mg and jumps to a maximum height of 278 mm when its takeoff angle is 57.0∘ above the horizontal. Find the takeoff speed of the froghopper.

**Takeoff speed** of the froghopper is 2.786 m/s

By analyzing the **vertical motion** of the froghopper,

The initial vertical velocity of the froghopper as it jumps from the ground is given by

[tex]U_{y}[/tex] = U₀Sinθ

here, θ = 57°

Therefore Sin57° = 0.838

[tex]U_{y}[/tex]= 0.838U₀

Vertical motion is the motion that occurs when the object is thrown all the way up, i.e. , the** initial velocity **or force acts only in the **vertical axis**, therefore this motion has only vertical motion.

**Maximum height** reached by the froghopper is h = 278 mm

h = 0.278 m

As we know that vertical velocity at the point of maximum height will be zero,

[tex]V_{y} = 0[/tex]

Since the vertical motion is an accelerated motion with constant (de)acceleration, so by using **Equation of motion**,

[tex]V^{2} _{y} - U^{2} _{y} = 2gh[/tex]

[tex]U_y = \sqrt{V^{2} _{y} - 2gh }[/tex]

[tex]U_y = \sqrt{0 - 2(-9.81) (0.278) }[/tex]

[tex]U_{y}[/tex] = 2.335 m/s

[tex]U_{y}[/tex] = 0.838U₀

U₀ = [tex]\frac{U_y}{0.838}[/tex]

U₀ = [tex]\frac{2.335}{0.838}[/tex]

U₀ = 2.786 m/s

The takeoff speed of the **froghopper** is 2.786 m/s.

To know more about **vertical motion**,

https://brainly.com/question/13490362

**#SPJ1**

This is physics 11th grade and a homework question I don’t understand how to do this or what the question is asking me

a) Frequency is the number of complete oscillations per second. Looking at the graph, there are 9 complete oscillations in 5 seconds. Thus,

Frequency = 9/5 = 1.8 oscillations per second

**Frequency = 1.8 Hz**

Period = 1/frequency = 1/1.8

**Period = 0.056 s**

b) When we differenctiate displacement with respect to time, the result is velocity.

Recall, period = 1/f = 5/9 cycles

1/4 cycle behind = 1/4 x 5/9 = 5/36

It is delayed with 5/36 sec with respect to displacement.

5/36 sec = 0.139 sec

Acceleration = first derivative of velocity = second derivative of displacement = 1/4 cycle behind velocity = 1/2 cycle behind displacement =

5/36 = 0.139 sec delayed with respect to velocity

= 5/18 = 0.2777 secs delayed with respect to displacement

Thus, **the number of seconds out of phase with the displacements is 0.278 seconds**

c) The formula for calculating the period of an ideal pendulum anywhere is

T = 2π√length/local gravity). We would calculate the local gravity.

From the information given,

length = 0.2

T = P = 5/9

Thus,

5/9 = 2π√0.2/local gravity)

(5/9)/2π = √0.2/local gravity

Square both sides. It becomes

[(5/9)/2π]^2 = 0.2/local gravity

local gravity = 0.2/[(5/9)/2π]^2

local gravity = 25.56 m/s^2

Thus,

**acceleration due to gravity = 25.56 m/s^2**

Recall, earth's gravity = 9.8 m/s^2

number of g forces = 25.56/9.8

**number of g forces = 2.61**

Jack drops off 10m high red bridge into swimming waters below. Assuming acceleration to be 9.91 m/s^2

A. What Jack speed as he hits the water?

Jack **speed** as he hits the water is 14.13m/s

**What is speed?**

The **speed **of an object, also known as v in **kinematics**, is the size of the change in that object's position over time or the size of the change in that object's position per unit of time, making it a scalar quantity. The instantaneous** speed** is the upper limit of the **average speed** as the duration of the time interval approaches zero. The **average speed** of an item in a period of time is equal to the **distance** travelled by the object divided by the duration of the period.** Velocity and speed** are not the same thing.

The only force on Jack is** gravity**, which points straight down, and has an **acceleration** of 9.91m/s². Whether he's falling off a bridge or simply standing still on the surface of the earth, the** acceleration** due to **gravity** is the same.

If you're looking for the **speed **of Jack as he hits the water, you just need to solve for v in the **equation**[tex]$v^2 = v_0^2 + 2ad$[/tex].

Here,

v is Jack's** speed** as he hits the water,

[tex]$v_0$[/tex] is Jack's initial **speed **(which is zero since he's not moving when he jumps),

a is Jack's** acceleration** (which is 9.91m/s²), and

d is Jack's** displacement** (which is the height of the bridge, which you said is 10m).

This gives you an answer of [tex]$v = \sqrt{2ad} = \sqrt{2(9.91)(10)} = 14.13 \ \mathrm{m/s}$[/tex]

To learn more about **speed**https://brainly.com/question/4931057

#SPJ9

What is the acceleration of a car,

moving along a straight line, that

increases its velocity from 0 to 15

m/s in 10 s?

The **acceleration **of a car, moving along a straight line, that increases its velocity from 0 to 15 is **A=1.5m/s.**

**Acceleration** = Velocity Change / Time Interval

So,

A=15/10

**A=1.5m/s .**

A slowing** car** slows down. It also **accelerates** because the speed changes. Imagine a car driving down the street. As speed increases, the car has positive acceleration. When a car turns a corner at a constant speed it changes direction and thus accelerates. The faster the rotation the greater the acceleration.

Therefore, any change in **velocity** in magnitude and direction causes **acceleration**. The main causes of poor acceleration are air and fuel issues and sensor issues. However mechanical problems can also cause poor performance. The car is moving forward and accelerating in the positive direction so the acceleration is in the same direction as the car is moving. An object can also have positive acceleration if it slows down while moving in a negative direction.

Learn more about **The acceleration** here:-https://brainly.com/question/14344386

#SPJ1

The purpose of the auricle is to equalize air pressure on both sides of the eardrums.TrueFalse

The auricle, also known as pinna is the visible portion of outer ear.

The purpose of auricle is to collect sound waves and send them through ear canal.

The eustachian tube connecting middle ear and back of nose, equalizes air pressure on both sides of the eardrum.

**Thus, the statement is false.**

please help!!

What is the name of the current theory that astronomers have developed that is used to describe the possible formation of the solar system?

**Answer:**

The answer of the question is nebular theory

A 1.2kg ball rolls forward with an acceleration of 1.11 m/s. What is the net force on the ball

**Answer:**

1.332 N

**Explanation:**

Net Force = Mass x Acceleration

1.2 x 1.11 = 1.332 N

I'm so sorry if I'm wrong.

FPressure is a function of force and area on which the force is exerted: P =AWhat is the effect of an increase in temperature of a sealed container of gaswith no change in volume?hA. The change in temperature decreases the force of the collisions ofthe container and gas particles, so the pressure decreases.B. The change in temperature increases the force of the collisions ofthe container and gas particles, so the pressure increases.C. The change in temperature decreases the area over whichcollisions of the container and gas particles occur, so the pressureincreases.D. The change in temperature increases the area over whichcollisions of the container and gas particles occur, so the pressuredecreases.

**B: The change in temperature increases the force of the collisions of**

**the container and gas particles, so the pressure increases.**

P = F/A

Force is directly proportional to Force, so , if force increases also Pressure.

Hi Can you help out with this physics question? We may learn a new thing

Features that must be present for a stable well-designed racing car.

For, a racing car the speed is high and also to finish the race, the car should be easy to turn around.

Lower the centre of gravity more will be its stability.

**A low centre of gravity is a must for a stable well-designed racing car.**

A Porsche 914 accelerates uniformly from 0 to 60 miles perhour in 5 seconds. Assuming a frictionless air track and a glider mass of 550grams, find the mass M2 that one must hang from the glider in order to obtain an accelerationequal to that of the Porsche.

The **mass M₂ **that one must hang from the glider in order to obtain an **acceleration **equal to that of the Porsche is 0.664 kilograms.

The **initial velocity U** of the porche is 0miles/hours or 0m/s.

The **final velocity V **of the porche is 60miles/hours or 26.84 m/s.

**Total time** period is 5 seconds,

Using equation of motion,

**V+U = at**

Putting all the values,

26.84= a(5)

a = 5.364 m/s².

Now, the mass of the glider is 0.550 Kg.

Let us assume that the glider and the mass are connected by a string. The **tension **in the string is T.

The mass M2 is hanged from one end the glider is on the horizontal surface.

When the system is released,

Total force on glider,

(0.550)a = T

Total force on the mass M2,

M2(a) = M2g - T.

Putting the value of T,

M2a = M2g - (0.550)a

(0.550)a = M2(g-a)

M2 = (0.550)×5.364/(9.8-5.364)

M2 = 0.664 Kg.

The **required mass **to be hung is 0.664 Kg.

To know more about **tension in string,** visit,

https://brainly.com/question/24994188

#SPJ1

A penny, starting from rest at Position 1, rolls down and then up a curved track towards Position 5. When it reaches Position 5, it rolls back down the track. Which description below is most consistent with what you can expect from the penny's motion?

A. The penny will roll as high as Position 3 since that position has the least potential energy.

B. The penny will roll past Position 1 since energy cannot be created or destroyed.

C. The penny will roll as high as Position 2 since some of the energy will be transformed to heat.

D. The penny will roll as high as Position 1 since energy cannot be created or destroyed

The **penny **will roll past Position 1 since **energy **cannot be created or destroyed, therefore the correct answer is option B.

The sum of all the energy in **motion **(total kinetic energy) and all the energy that is **stored **in the system (total potential energy) is known as **mechanical **energy.

ME= PE + KE

As given in the problem if a penny, starting from rest at **Position **1, rolls down and then up a curved track towards Position 5.

When it reaches Position 5, it rolls back down the **track**, then we have to find out Which description below is most consistent with what you can expect from the penny's **motion**,

Thus, the penny will roll past **Position **1 since energy cannot be created or destroyed, therefore the correct answer is option B.

To learn more about **mechanical energy **from here, refer to the link;

brainly.com/question/12319302

#SPJ1

A storage tank 20 m high is filled with pure water. (Assume the tank is open and exposed to the atmosphere at the top.)

(a) Find the gauge pressure at the bottom of the tank.

(b) Calculate the magnitude of the net force that acts on a square access hatch at the bottom of the tank that measures 0.6 m by 0.6 m.

PLEASE HELP!!!

The gauge **pressure **at the bottom of the tank is 297500 N/m².

The magnitude of the net **force **that acts on a square access hatch at the bottom of the tank is 107100 N.

The **pressure **at the bottom of the tank is the pressure due to the weight of the fluid above it and the atmospheric pressure.

The **pressure **due to the atmosphere = 101300 N/m²

The pressure due to the water above the tank is calculated with the formula below:

Pressure = height * density * g

height of tank = 20 m

the density of water = 1 * 10³ kg/m³

g = 9.81 m/s²

Pressure due to water = 20 * 1 * 10³ kg/m³ * 9.81

Pressure due to water = 192000 N/m²

Total pressure = 192000 + 101300 N/m²

Total **pressure **= 297500 N/m²

B. Force = pressure * area

area of the hatch = 0.6 * 0.6 = 0.36 m²

**Force **= 297500 N/m² * 0.36 m²

**Force **= 107100 N

Learn more about **pressure **and **force **at: https://brainly.com/question/8033367

#SPJ1

Three students that share a townhouse find that their electric bill for October is $5.29 less than the September bill. The total of both bills is $155.93, and each bill is split evenly among the roommates how much they each owe in September?
Given that F( x) = x + 2, evaluate F(2)
What inference does Kennedy make in this part of his speech? Berlin shows that communism is a harmful system that hurts the people living under it. Berlin shows that democracy will never be accepted in the West. The Soviets should come to Berlin to help restore the city. The Soviets should come to Berlin to learn the right way to practice communism.y'all better give me sum so I can get extra points smhnn
What do you need to do before you analyze yourcurrent work systems?
Please help on 15 and 16.
Isaac performs at a fair he earns 100 dollars plus 3 dollars for every ticket sold he wants to earn more than 450 dollars. write an inequality to find the number of tickets that need to be sold for isaac to earn more than 450 dollars.
PLEASE ANSWER ASAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Jaylen's beta fish holds 4 1/2 gallons of water. It takes him 1 7/8 minutes to fill. What is the flow rate of the water in gallons per minute? show your work.
Find the number which wohen addedto its square, makes 90..
That whenever any Form of Government becomes destructive of these ends, it is the Right of the People to alter or to abolish it, and to institute new Government, laying its foundation on such principles and organizing its powers in such form, as to them shall seem most likely to effect their Safety and Happiness. - from the Declaration of Independence, 1776What does the excerpt above, from the Declaration of Independence, justify?The Boston Tea PartyThe Boston Tea PartyB The American invasion of CanadaThe American invasion of CanadaC The assembly of the Virginia House of BurgessesThe assembly of the Virginia House of BurgessesD The Revolutionary War
What are the astronomer qualifications
Why was the Battle of Fallen Timbers important for the new democracy?Please write 3 paragraphs, stating 3 different reasons why the battle was important. (Paragraphs should be 4-6 sentences each;
Tungsten filament is the element found in light bulbs. Whichsubatomic particles surrounding the nucleus of tungsten are responsible for thecontinuous spectrum observed?
Identify the labeled structures.A:B:C:D:E:
Last year, Raina had $10,000 to invest. She invested some of it in an account that paid 7% simple interest per year, and she invested the rest in an account that paid 6% simple interest per year. After one year, she received a total of $620 in interest. How much did she invest in each account?
1 The modern nation-state requires that citizens(A) retreat into culture (B) cover up differences(C) do not retreat into culture (D) highlight differences
VERY VERY URGENT I WILL GIVE BRAINLIEST8. Taxonomy is the science of grouping and naming organisms based on similarities and differences a. trueb. false
which phrase best explains what a fiscal policy is, based on its use in this sentence from paragraph 6? one of germany's fiscal policies is to collect taxes in many stages during the production of items.
On Mrs. Sean's desk,there are pink and yellowmarkers. The ratio of pinkmarkers to total markersis 1:3. If there are 16yellow markers, then howmany markers are pink?
A net force of 43.1 N causes a mass to accelerate at a rate of 0.2 m/s2. Determine the mass in kilograms.